RECO Solar Panel รีโค่โซล่าพาเนล รับพลังงานแสงอาทิตย์จ่ายไฟให้กล้องวงจรปิด RECO กันน้ำกันฝน

Solar panel materials: PCB board, solder ribbon, solar cell sheet, EVA, ETFE, black tape,plastic shell, wire PCB: 1.2mm glass fiber

Welding tape: 1.2*0.12mm

Solar cells:0.18mm thick, 156 monocrystalline solar cells or 158.75 monocrystalline siliconcells

EVA: 0.45mm, 0.45mm

PET: 1.2mm

Black tape: 4.0*185mm

Plastic shell: 120.5*173.5*12.5mm8.Wire: 13 core-3m Android wire

After the solar panels are laminated, they are mainly tested for working power.

Solar radiation intensity: 1000W/m2

Temperature: 25°C

Air quality: AM1.5.

Use the power value of the load tester for bareboard load test

Humidity:10~90%

Use electronic load meter, with wire test, when the load is 12.5Ω, the output power ≥ 3.2Wis qualified

The light intensity is corrected every 2 hours

Storage conditions: normal temperature, humidity not more than 60%.

Use in an unobstructed outdoor environment under the sun

Working environment temperature:-20°C~60°C

Using soldering iron temperature: 360±10°C

The spot welding time isno more than 3 seconds, and the interval between multiple spotwelding is no less than 30 seconds.

Dustproof and waterproof rating of solar panels: IP65